How to reset oil and service light in Ford Transit?

This guide explains how to reset the oil and service light on the most common Ford Transit generations, using verified methods based on factory procedures. If the oil warning or service reminder appears on your Ford Transit dashboard, it usually means the vehicle has reached its scheduled maintenance interval. After completing an oil change or routine service, the system should be reset so it can calculate the next interval correctly.

Important: This guide applies to maintenance reminders only. It does not apply to the red oil pressure warning light or fault-related service messages caused by a mechanical issue. Using these methods will only remove the message; it will not resolve the underlying cause of the problem.

Ford Transit MK9 (2019+) Oil and Service Light Reset

Most European Ford Transit MK9 models reset through the dashboard menu. Depending on instrument cluster software, there are two common menu layouts.

Engine oil D 0W30 1L Ford Castrol Magnatec Professional

Engine oil E 5W20 1L Ford Castrol Magnatec Professional

Engine oil 15W40 Mobil Super 1000 1L

Motor oil Omnicraft 5w30 1l Ford Transit

Ford Transit MK8 (2014-2019) Oil Light Reset

The most common reset method for Transit MK8 models is the brake and accelerator pedal procedure.

1. Turn the ignition ON without starting the engine.
2. Fully press the brake pedal.
3. Fully press the accelerator pedal.
4. Hold both pedals down together for 20 to 25 seconds.
5. Wait until the display shows Oil Reset Complete.
6. Release both pedals.
7. Turn ignition OFF and restart the vehicle.

Some later MK8 models may also allow reset through the dashboard menu.

Ford Transit MK6 / MK7 (2000-2013) Service Light Reset

Older Ford Transit MK6 and MK7 models usually use the same pedal reset method. Depending on model year, the dashboard may show messages such as Service Oil Soon or Service Oil Now.

1. Turn the transit ignition to position II.
2. Do not start the engine.
3. Fully press the brake pedal.
4. Fully press the accelerator pedal.
5. Hold both pedals for at least 15 seconds.
6. Wait for the service light to flash or reset confirmation to appear.
7. Turn ignition OFF.
8. Restart the vehicle to confirm the warning has cleared.

Why Ford Transit Oil or Service Light Won’t Reset

If the reminder stays on after following the procedure, possible reasons include:

• - Incorrect ignition position used during reset
• - Pedals not fully pressed
• - Reset procedure not held long enough
• - Vehicle has an active fault code
• - Wrong reset method used for that model year

If the message remains, diagnostic equipment may be required.

Engine Oil 0W30 5L Ford Castrol Magnatec ProfessionalCheck product →

Final Tips

Always reset the service light only after completing the actual oil change or scheduled maintenance. Clearing reminders without servicing the vehicle can lead to incorrect maintenance intervals. If you are unsure which Ford Transit generation you own, check the differences on our website.