Transmission Mercedes Sprinter W906 is a propeller shaft, CV-joint
The transmission category is all the parts that transfer engine power to the wheels of the Mercedes Sprinter II. The drivetrain is subjected to very high forces, therefore the materials from which its parts are made must be of the highest quality. Using low-end substitutes is a short-term solution. In the worst case, this can lead to damage to other drivetrain components. The parts of this category include such small parts as the reverse gear sensor, seals and the largest parts of the system, such as the driveshaft, live axle and drive axle.
Transmission Mercedes Sprinter W906 is a propeller shaft, CV-joint
The transmission category is all the parts that transfer engine power to the wheels of the Mercedes Sprinter II. The drivetrain is subjected to very high forces, therefore the materials from which its parts are made must be of the highest quality. Using low-end substitutes is a short-term solution. In the worst case, this can lead to damage to other drivetrain components. The parts of this category include such small parts as the reverse gear sensor, seals and the largest parts of the system, such as the driveshaft, live axle and drive axle.
Gearbox Mercedes Sprinter II
The gearbox is an element of the drive system that transfers the rotational speed of the crankshaft to the drive shaft by means of a complex set of gears. The rotational speed of the propeller shaft depends on the rotational speed of the engine and the selected gear. The gearbox is subject to high power, therefore the oil should be changed regularly. Regular oil change extends the life of the gearbox and its components.
Drive shaft Mercedes Sprinter 2006
The second generation Mercedes Benz Sprinter is equipped with one or two drive shafts, depending on the version selected. Rear-wheel drive vans have a single propeller shaft that connects the gearbox to the rear differential. The Mercedes Sprinter with 4x4 drive has a slightly modified drivetrain structure. Behind the gearbox there is a transfer case which transmits the torque to both axles and, if necessary, reduces the rotational speed while maintaining power. This feature is essential when navigating over rough terrain with heavy loads. Power is supplied to the axle from the transfer case by means of two shafts with cardan joints on both sides. The drive shaft is supported by the shaft supports.
Clutch Mercedes Sprinter W 906
The clutch is the link between the engine and gearbox. Separating the engine from the gearbox is necessary to change the gear. The clutch has an abrasive disc that is subject to high wear when carrying heavy loads. The clutch is a wear part and depending on how the van is used, sooner or later the time will come when it will be necessary to replace it.
In our store you will find all parts for the Mercedes Sprinter driveline and more. If you cannot find the part you need, please contact our sales department and our advisers will be happy to help you. Less text